15,97

Size Balsa, cork, precision plastic

This spelafili has been designed to precisely cut sheets of balsa and many other materials such as foam PVC, plastic, cork, foams, etc. Up to 1/4″ (6mm) thick in strips up to 1/2″ (12mm) wide. This design has a control screw with 32 threads per inch so that each turn of the wheel will move the blade 1/32 inch (0.8 mm). Starting with the blade in the initial position, four laps will produce a perfect 1/8″ (3mm) strip.

The blade provided is type 11 used in knife models, so they are replaceable. To install or replace the blade, loosen the fixing screws and slide a blade between the latch and the sled. Place on a smooth surface and with the blade almost vertical, tighten the screws. Note that the stripper can be set for use with the left or right hand. Depainting is best done on a smooth surface. Draw the stripper towards you along the edge of the material to be cut.

This set includes:

1x Stripper tool
1x hobby blade

5 in stock

X